Page 1
- 1 push ring Recommendations CD-03600 and its cutting tools are precision tools that have to be used and stored with care, avoiding shocks, falls and mistreatments. The cutting tools must be cleaned after each use, with a lubed cloth or an anti-rust solution.
Page 2
The frame will be correctly secured on a repair stand and the working zones well lubricated with cutting fluid. The operator will wear VAR AP-94300 protection gloves in order to avoid any cuts or pinches and VAR AP-94500 safety glasses to avoid any cutting fluid or metallic...
Page 3
Instructions 1. For a perferct stability, install the frame on a VAR PR-90100 or VAR PR-90200 repair stand. 2. Ensure the right reaming and facing cutter tools, so the selection matches your frame dimensions. Please refer to the previous page table.
Page 4
Illustrations Cutting tool support with handles Reaming and facing tool Tapered pilot Bearing ring Compression spring Push ring...