Preparing A Microsd Card For Use; Setting The Date And Time - Tascam DR-03 Owner's Manual

3 – Preparations

Preparing a microSD card for use

A microSD card must be formatted by this unit to
be used with the unit.
1 Confirm that the microSD card is inserted
and turn the power ON.
2 If a new card or a card that has been
formatted by a device other than this unit
has been inserted, the following pop-up
message appears.
3 Press the (
¯
Exec.
formatting the card.
CAUTION
Formatting erases all data on the card.
34
TASCAM DR-03
) key to start
4 When formatting is complete, the Home
Screen opens.
CAUTION
When formatting, confirm that the remaining
battery charge is sufficient or use USB bus power.
You can also format the card at any time with this
unit. (See "Reformatting the microSD card" on
page 90.)

Setting the date and time

This unit adds date and time information to
recorded files using its internal clock. Timer
recording also uses the internal clock.
1 Press the key to open the
SETUP
menu screen.
2 Use the / keys to select the
+ –
item.
SETUP
menu
SYSTEM