Reducing Low-Frequency Noise When Recording - Tascam DR-03 Owner's Manual

NOTE
In some cases, when connected to the LINE output
of a device the volume cannot be adjusted and
might be too loud. In such cases, use the headphone
output jack or another output that can have its level
adjusted.
Reducing low-frequency noise when
recording
This unit has a low-cut filter that can be used to
reduce low frequencies during recording for a
clearer sound. Unnecessary noise from the sounds
of air-conditioning and wind during outdoor
recording, for example, can be reduced using the
low-cut filter. Set the filter to one of three levels
according to the recording conditions.
1 Press the key to open the
SETUP
menu screen.
2 Use the / keys to select the
+ –
3 Press the
4 Use the
5 Press the
SETUP
menu item.
REC
(
¯
Enter
menu screen.
/ keys to select the
+ –
(
¯
Enter
setting screen.
CUT
4 – Recording
) key to open the
REC
item.
LOW CUT
) key to open the
LOW
43
TASCAM DR-03