10 - Troubleshooting - Tascam DR-03 Owner's Manual

10 – Troubleshooting
If you are having trouble with the operation of this
unit, please try the following before seeking repair.
If these measures do not solve the problem, please
contact the store where you bought the unit or a
TASCAM Service Center.
Power will not turn ON.
ª
Confirm that the batteries are not dead.
•
Confirm that the batteries are installed with the
•
correct +/– orientations.
The unit is not responding to operations.
ª
Is the switch set to
/HOLD
•
The microSD card is not recognized.
ª
Confirm that the microSD card is securely
•
inserted.
Playback is not possible.
ª
If it is a WAV file, confirm that it is of a
•
compatible sampling frequency.
If it is an MP3 file, confirm that it is of a
•
compatible bit-rate.
100
TASCAM DR-03
ª
•
•
•
•
•
ª
•
?
HOLD
•
•
•
•
ª
•
•
•
No sound is output.
Are headphones connected?
Is the set to OFF?
SPEAKER
Confirm that the monitoring system is
connected correctly.
Is the volume level of the connected monitoring
system minimized?
Is the output level of this unit minimized?
Recording is not possible.
Reconfirm connections.
Reconfirm the input setting.
Check whether the recording level is too low.
Confirm that the microSD card is not full.
Confirm that the maximum number of files has
not been reached.
The recording level is low.
Is the input level setting too low?
Is the gain setting too low?
Is the output level of a connected external
device too low?