TANDBERG
Telepresence T3
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
PAG E 2 3 / 5 8
mountinG thE monitor
1.
Before you start mounting the monitors, the following cables must be con-
nected:
Cable 117850 to the left dnAm
Cable 117852 to the center dnAm
Cable 117856 to the right dnAm
Space is too tight to permit a convenient cable connection after the monitor
has been mounted.
2.
Unpack the monitor assembly and lift onto the bottom module. It requires a
minimum of four persons to lift the assembly, using the attached straps and
gloves. Make sure you hold the monitor level, otherwise one of the straps
may slip.
AssEmbliEs