Getcapmagneprint; Getcapmagneprintencryption; Getcapmagnesafe20Encryption; Getcapmagstripeencryption - Magtek aDynamo Programmer's Reference Manual

3 –MTSCRA Class Methods

3.25 getCapMagnePrint

Retrieves MagnePrint capabilities.
public string getCapMagnePrint()
Parameters: None
Return Value:
String representing MagnePrint capabilities:
0 = No MagnePrint,
1 = Short MagnePrint,
2 = Long MagnePrint

3.26 getCapMagnePrintEncryption

Retrieves MagnePrint Encryption capabilities.
public string getCapMagnePrintEncryption()
Parameters: None
Return Value:
String representing MagnePrint Encryption capabilities:
0 = No Encryption,
1 = Same as MagStripe (8122),
other values TBD.
If absent, default value is 1.

3.27 getCapMagneSafe20Encryption

Retrieves MagneSafe 2.0 Encryption capabilities.
public string getCapMagneSafe20Encryption()
Parameters: None
Return Value:
String representing MagneSafe 2.0 Encryption capabilities. 0 = Not supported, other values TBD.

3.28 getCapMagStripeEncryption

Retrieves MagneStripe Encryption capabilities.
public string getCapMagStripeEncryption()
Parameters: None
Return Value:
String representing MagStripe Encryption capabilities. 0 = No Encryption, 1 = TDES DUKPT / PIN
Variant, other values TBD

3.29 getCapMSR

Retrieves MSR capabilities.
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT| Secure Card Reader Authenticator | Programmer's Reference (Android)
Page 18 of 42 (D99875728-31)