Gettrack1; Gettrack2; Gettrack3; Gettrack1Masked - Magtek aDynamo Programmer's Reference Manual

3 –MTSCRA Class Methods
public string getMaskedTracks()
Parameters: None
Return Value:
Return stored masked tracks data string.

3.10 getTrack1

Get stored track1 data. This field contains the encrypted track data for track 1.
public string getTrack1()
Parameters: None
Return Value:
Return stored track1 data string.

3.11 getTrack2

Get stored track2 data. This field contains the encrypted track data for track 2.
public string getTrack2()
Parameters: None
Return Value:
Return stored track2 data string.

3.12 getTrack3

Get stored track3 data. This field contains the encrypted track data for track 3.
public string getTrack3()
Parameters: None
Return Value:
Return stored track3 data string.

3.13 getTrack1Masked

Get stored masked track1 data.
public string getTrack1Masked()
Parameters: None
Return Value:
Return stored masked track1 data string.
For an ISO/ABA card, the PAN is masked as follows:

The specified number of initial characters is sent unmasked. The specified number of trailing
characters is sent unmasked. If Mod 10 correction is specified, all but one of the intermediate
characters of the PAN are set to zero; one of them will be set such that last digit of the PAN calculates
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT| Secure Card Reader Authenticator | Programmer's Reference (Android)
Page 13 of 42 (D99875728-31)