1. Manuals
  2. Brands
  3. evertz Manuals
  4. Computer Hardware
  5. EMX Series
  6. User manual

evertz EMX Series User Manual

Multiframes
Hide thumbs
Table of Contents

Advertisement

Quick Links

© Copyright 2011 - 2021
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone:
+1 905-335-3700
Sales:
sales@evertz.com
Tech Support: service@evertz.com
Web Page:
http://www.evertz.com
Version 1.6, Jan 2021
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the EMX Series Multiframes. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the EMX Series Multiframes. Due to on going research and development, features and specifications in this manual are subject to
change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.
EMX Series Multiframes
User Manual
Fax: +1 905-335-3573
Fax: +1 905-335-7571

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for evertz EMX Series

Summary of Contents for evertz EMX Series

  • Page 1 Version 1.6, Jan 2021 The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of purchasers of the EMX Series Multiframes. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the EMX Series Multiframes.
  • Page 2 This page left intentionally blank...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
  • Page 4 WARNING Changes or modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables...
  • Page 5 Jan 2021 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance either expressed or implied.
  • Page 6 EMX Series Multiframes This page left intentionally blank Page - ii Revision 1.6...

  • Page 7: Table Of Contents

    EMX Series Multiframes TABLE OF CONTENTS OVERVIEW ............................1 INSTALLATION ..........................3 2.1. COOLING – EMX1-FR ....................... 4 2.1.1. Fan Exhaust ........................4 2.2. COOLING - EMX3-FR ........................ 5 2.2.1. Fan Exhaust ........................5 2.3. COOLING – EMX6-FR ....................... 5 2.3.1.
  • Page 8 EMX Series Multiframes 4.4. OPENING AND CLOSING THE FRONT PANEL ..............15 4.4.1. EMX3 and EMX6......................16 4.4.2. EMX1 ..........................16 4.5. INSTALLING THE MODULES ....................16 4.6. REMOVING THE MODULES ....................16 SERVICING INSTRUCTIONS ......................17 5.1. INSTRUCTIONAL SAFEGUARDS ................... 17 5.1.1.

  • Page 9: Overview

    EMX Series Multiframes OVERVIEW The EMX series frames are designed to house the EMR series router, the EMC master controller and other high-density system products. This advanced rack frame design comes in three sizes. The EMX1- FR occupies 1RU rack space and can house up to 2 single-slot modules. The EMX3-FR occupies 3RU rack space and can house up to 5 single-slot modules of any combination of the EMR and EMC products.
  • Page 10 EMX Series Multiframes This page left intentionally blank Page - 2 Revision 1.6...

  • Page 11: Installation

    EMX Series Multiframes INSTALLATION The EMX1-FR, EMX6-FR and EMX3-FR frames use an EMX-FC frame controller which provides two network connections via RJ-45 connectors and two references via BNC connectors. The BNC labeled Ref 1 is the main reference and the BNC labeled Ref 2 is the backup reference. Figure 2-2 and Figure 2-3 show the rear of the EMX3-FR and EMX6-FR frames respectively.

  • Page 12: Cooling - Emx1-Fr

    EMX Series Multiframes Figure 2-3: EMX6-FR Rear View 2.1. COOLING – EMX1-FR The EMX1-FR frame is designed to ensure adequate cooling for up to 140 watts of processing power per frame. PSU’s are cooled with their own internal fans. Adjacent equipment may be mounted immediately to the top and bottom of the EMX1-FR.

  • Page 13: Cooling - Emx3-Fr

    EMX Series Multiframes 2.2. COOLING - EMX3-FR The EMX3-FR is designed to ensure adequate cooling for up to 360 watts of processing power per frame. Fans at the front and rear of each power supply module accomplish forced air cooling.

  • Page 14: Mounting

    EMX Series Multiframes 2.4. MOUNTING The EMX1-FR requires a 19” x 1.75” x 18.75” (483 mm x 45mm x 477mm) space, the EMX3-FR requires a 19” x 5.25” x 15.75” (483 mm x 133 mm x 400 mm) space and the EMX6-FR requires a 19” x 10.5” x 15.75”...

  • Page 15: Power Supply Status Indicators

    EMX Series Multiframes 2.5.2. Power Supply Status Indicators Figure 2-4: EMX1-PS, EMX3-PS & EMX6-PS Status Indicators Page - 7 Revision 1.6...

  • Page 16: Emx1-Fr

    EMX Series Multiframes 2.5.2.1. EMX1-FR EMX1-FR power supplies have 2 LEDs which are located on the rear side of the frame, showing the status of each supply. Top LED is green and indicated AC power is on or off. Bottom LED is bi-colored: green and yellow.

  • Page 17: Frame Controller

    EMX Series Multiframes 2.6. FRAME CONTROLLER To successfully install the EMX-FC, you will require the following: 1. Unused IP address on the network or a DHCP server. 2. Evertz serial cable. Before handling the card it is important to minimize the potential effects of static electricity. It is therefore recommended that an ESD strap be worn.

  • Page 18: Configuring Basic Network Settings

    EMX Series Multiframes 2.6.1. Configuring Basic Network settings To make changes to the IP address select Network Setup. Set the IP address of the B Network as well as the Netmask and the Gateway. Make the same changes for the IP address and Gateway of Network A and C as required.

  • Page 19: Specifications

    EMX Series Multiframes SPECIFICATIONS 3.1. ELECTRICAL EMX6-FR: AC Mains Input: Auto ranging, 100  240 VAC, 50/60 Hz Max Operating Current: 9.5 A (@ 115 VAC nominal), 4.0 A (@ 220 VAC nominal) Max Power Consumption: 850 W Max Module Load:...

  • Page 20: Compliance

    1.75” (45 mm) Width: 19.0” (483 mm) Depth: 18.75” (477 mm) Module Capacity: 2 single slot EMX series modules Weight: 15 lbs (6.8kg) with 2 power supplies, no slots occupied 22.0lbs (10kg) with 2 power supplies, all slots occupied 3.2.1. Compliance...

  • Page 21: Physical

    EMX Series Multiframes 3.4. PHYSICAL Dimensions: EMX3-FR: 19” W x 5.25” H x 15.75” D (483mm W x 133mm H x 400mm D) EMX6-FR: 19” W x 10.5” H x 15.75” D (483mm W x 266mm H x 400mm D) EMX1-FR: 19.0”...
  • Page 22 EMX Series Multiframes This page left intentionally blank Page - 14 Revision 1.6...

  • Page 23: Installing And Removing The Modules

    EMX Series Multiframes INSTALLING AND REMOVING THE MODULES 4.1. ELECTRO STATIC DISCHARGE (ESD) PRECAUTIONS All semiconductor devices are sensitive to ESD. To prevent any damage or degradation on components of the product caused by ESD, observe these precautions when installing or removing modules from the frame.

  • Page 24: Emx3 And Emx6

    EMX Series Multiframes 4.4.1. EMX3 and EMX6 In order to insert or remove modules you will have to open the front panel. Turn the two captive screws located on the front panel counter clockwise several turns until they release completely from the front extrusions.

  • Page 25: Servicing Instructions

    5.1. INSTRUCTIONAL SAFEGUARDS Each EMX series device should have the following warning labels attached as instructional safeguards. 5.1.1. IEC 60417-5041 Hot Surface The flat surface with waved line symbol is intended to alert the user that surface may be hot and should not be touched without taking care.

  • Page 26: The Iec 60417-6042 Lightning Flash Symbol

    EMX Series Multiframes 5.1.2. The IEC 60417-6042 Lightning Flash Symbol The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “Danger voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 27 EMX Series Multiframes Do not run the frame for extended periods of time with one of the power supplies removed or with the door open. Proper cooling of the frame requires both power supplies to be inserted into the frame, or one power supply and a power supply fan module.
  • Page 28 EMX Series Multiframes 3. From the front of the frame, locate the power supply locking tab. Releasing this tab will allow the PSU to be removed from the frame. 4. Release the power supply locking tab. 5. Remove the Power Supply from the frame.

This manual is also suitable for:

Emx1-frEmx3-frEmx6-frEmx1-psEmx3-psEmx6-ps

Table of Contents