Husqvarna BS 75 Operator's Manual page 22

1. Remove the tool or attach the blade protection
cover.
WARNING:
The blades are very sharp.
2. Make sure that the drive wheels are engaged. Refer
To engage and disengage the drive wheels on
to
page 21 .
3. Attach the lifting equipment at the lifting point.
4. Lift the product slowly.
To attach the product to a
transportation vehicle
1. Make sure that the drive wheels are engaged. Refer
To engage and disengage the drive wheels on
to
page 21 .
2. Attach tie-down straps to the lifting point.
3. Attach and tighten the tie-down straps to the
transportation vehicle.
4. Make sure that the product cannot move.
22
Use protective gloves.
To disassemble and assemble the
product BS 75
1. Disconnect the power supply.
2. Remove the unit with the connection for the dust
extractor.
3. Loosen the 2 knobs (A).
A
4. Turn the 2 levers forward (B).
B
1804 - 001 - 06.05.2022