Dometic MOBICOOL MCF32 AC/DC Installation And Operating Manual page 16

Operation
2. Release the latch.
✔ The latch audibly clicks in place and secures the cooling device lid.
6.7 Setting the temperature
1. Press the "SET" button once.
2. Use the "+" and "–" buttons to select the cooling temperature.
✔ The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is
displayed again.
6.8 Switching off the cooling device
1. Empty the cooling device.
2. Switch the cooling device off.
3. Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odour build-up.
6.9 Using the interior light (only MCF60)
1. Ensure the display shows the actual temperature.
2. Press the "–" button to switch the interior light on.
3. Press the "–" button again to switch the interior light off.
✔ The black dot (fig. 2 8, page 3) in the upper left corner of the display indi-
cates whether the interior light is switched on or off.
I
NOTE
The interior light switches off automatically after 30 minutes.
6.10 Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity. Defrost the cooling device in good time
to avoid this.
16
MCF32, MCF40, MCF60, FR40 AC/DC
EN