Using Training Mode; Putting On Your Transmitter Belt - Suunto T6C User Manual

4 USING TRAINING MODE

en
In mode you can measure all your training activity.
TRAINING
NOTE: Even though both Suunto t6c and the transmitter belt are water-resistant, the
radio signal does not carry in water, which makes the communication between Suunto t6c
and the transmitter belt impossible.

4.1 Putting on your transmitter belt

Put on the belt as illustrated and switch to mode to start monitoring your
TRAINING
heart rate. Moisten both contact areas (1) with water or gel before putting the belt on.
Ensure the belt is centered on your chest.
1 2 3 4
23