Using Autolap - Suunto T6C User Manual

5.2 Using autolap

With , you can define laps in distance instead of time (interval training). When
AUTOLAP
autolap is turned on (and your speed and distance POD is activated), your Suunto heart
rate monitor shows total distance, average lap speed, and lap time for each lap.
Setting Value
autolap on / off
dist 00.00
NOTE: When using the autolap feature, it is very important to calibrate your speed and
distance POD accurately.
To set the autolap feature on:
1. In the settings menu, enter
2. Scroll to
AUTOLAP
3. Set the autolap on or off with [Lap +] and [Light -] and accept with [Mode].
4. Set the lap distance with [Lap +] and [Light -] and accept with [Mode].
5. Press [Start Stop] to exit.
Description
Autolap feature: on or off
Lap distance: between 0.0 and 99.9
.
SPD/DST
with [Lap +] and [Light -] and enter with [Mode].
en
33