CMC ANCHOR STRAPS Quick Start Manual

Hand-wash soiled products in clean warm water. If necessary for effective cleaning, use an
unscented mild liquid soap or a mild detergent that is safe for nylon and polyester. Avoid whitener,
brightener, or bleach containing products. Do not use a pressure washer. Rinse thoroughly. Dry at
room temperature between 10° C and 30° C. Avoid direct sunlight, machine driers, and direct heat
or flame.
WARRANTY & REPAIRS
If your CMC product has a defect due to workmanship or materials, please contact CMC Customer
Support at info@cmcpro.com for warranty information and service. CMC's warranty does not cover
damages caused by improper care, improper use, alterations and modifications, accidental damage
or the natural breakdown of material over extended use and time. All repair work shall be performed
by the manufacturer. All other work or modifications void the warranty and releases CMC from all
liability and responsibility as the manufacturer.
SAMPLE INSPECTION AND MAINTENANCE LOG
The following sample log provides an example of the records that should be maintained by the
purchaser or user of life safety equipment.
EQUIPMENT INSPECTION AND MAINTENANCE
LOG
Item______________#______ Date in Service________
Brand/Model_________________ Strength___________
Date How Used or Maintained Comments
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117, USA
805-562-9120 / 800-235-5741
cmcpro.com
ISO 9001 Certified
© CMC Rescue, Inc. All rights reserved
CMC and are registered marks of CMC Rescue Inc.
Control No.: 2010XXIN01_Rev00
Name
ANCHOR STRAPS
WARNINGS
• FAILURE TO COMPLY WITH INSTRUCTIONS OR IMPROPER
USE OF THIS EQUIPMENT MAY RESULT IN SERIOUS INJURY
OR DEATH.
• THIS EQUIPMENT HAS BEEN DESIGNED AND MANUFACTURED
FOR USE BY EXPERIENCED PROFESSIONALS ONLY.
• DO NOT ATTEMPT TO USE THIS EQUIPMENT WITHOUT
PROPER TRAINING.
• THOROUGHLY READ AND UNDERSTAND ALL LABELS AND
INSTRUCTIONS BEFORE USE.
• USE, INSPECT, AND REPAIR ONLY IN ACCORDANCE WITH
MANUFACTURER'S INSTRUCTIONS.
• ASSURE THAT ANY COMBINATION OF COMPONENTS OR
SUBSYSTEMS, OR BOTH, DO NOT INTERFERE WITH THE SAFE
FUNCTION OF EACH OTHER.
• DO NOT EXPOSE TO CHEMICALS WHICH ARE HARMFUL
TO NYLON OR POLYESTER. IF IN DOUBT, CONTACT THE
MANUFACTURER.
• AVOID CONTACT WITH SHARP EDGES OR ABRASIVE
SURFACES.
Legend
Imminent risk of serious
injury or death.
!
Imminent risk of accident
or injury.
Appropriate function
or use.
Equipment
incompatibility.