Steam Ironing; Using The Iron's Special Features; Spray Mist; Auto-Off - Sunbeam 3983 User Manual

STEAM IRONING

1. Follow the instructions for "Filling the Water Reservoir" on Page 6.
2. Plug the cord into a 120-Volt AC outlet.
3. Turn the small Steam dial to the appropriate setting.
4. Turn the large Fabric/Temperature dial to the fabric setting you desire (Synthetic, Silk, Linen,
Cotton or Wool). Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is
sitting on its heel rest on a stable, protected surface.
TIP: Refer to the Ironing Guide on Page 10 for the recommended setting for your fabric.
5. The Temperature Indicator Light will go off when iron reaches appropriate temperature.
HOW TO USE THE SPECIAL FUNCTIONS

SPRAY MIST

®
The SPRAY MIST feature dampens the fabric to aid in removing wrinkles from heavy fabrics and
®
for setting creases. To use the SPRAY MIST

AUTO-OFF

After 30 minutes, the power indicator light will flash steadily. This indicates that the iron is no
longer heating.
To restart the iron, unplug the power cord and plug it back in. If you do NOT want to iron any
longer, unplug the iron. Then turn the small Steam dial to Dry/O and the large
Fabric/Temperature dial to Off/O.
WARNING: Auto-Off is a safety feature and is not a recommended means for turning your iron
off. See "Caring for Your Iron After Use" on Page 8.
feature: Press the SPRAY MIST
®
7
button firmly.
®