How To Use - Panasonic EH-XT20 Operating Instructions Manual

The ionic cleansing and toning device
Table of Contents

Advertisement

How to use

• Unplug the AC adaptor.
The appliance will not turn on when the AC adaptor is
connected.
• Remove the protective cap before use.
• Refer to page 20 when using COOLING mode.
1
1
Prepare your skin care products.
Lotion, toner
1 Attach a cotton pad (
the titanium head.
• Fix it with the cotton ring (
• Fix it so that the cotton pad
does not cover the
depression (
).
c
• Use a thicker cotton pad if it
comes off easily.
2 Soak the cotton pad with lotion till it is
fully saturated.
• Make sure that lotion fully penetrates
into the inner side of the cotton pad.
18
PB017050 - EH-XT20
_(01EN)_11-27-18.indd 18
) into
c
a
a
).
b
Skin care products other than toner and lotion
Apply the skin care product to necessary
portions of the face.
• A cotton pad is not required.
2
2
Press the
switch and select a mode.
Each press switches to the next mode.
OFF
PURIFYING MOISTURIZING COOLING
b
• The appliance starts from PURIFYING mode each
time the power is turned on.
3
3
Press the
level.
Press once to switch to the next microcurrent level.
(Except for COOLING mode)
LOW
• Lamp display will automatically switch to mode
function display after approximately 5 seconds after
selection.
(Microcurrent level will not be displayed.)
AUTO
switch and select a microcurrent
HIGH
2018/11/27 16:55:26

Advertisement

Table of Contents
loading

Table of Contents