Panasonic EH-XT20 Operating Instructions Manual page 12

POWER/SELECT switch
Press once for next mode.
: Warm sensation
(orange)
Mode Mode display
OFF
PURIFYING
MOISTURIZING
COOLING
AUTO
• The appliance starts from PURIFYING mode each time
the power is turned on.
• The indicator of the selected mode turns on.
12
PB017050 - EH-XT20 _(01EN)_11-27-18.indd 12
: Cooling : Microcurrent
(blue) (white)
Mode function
display
MICROCURRENT switch
Press once to switch to the next microcurrent level.
LOW HIGH
• Indicator shows the selected microcurrent level.
• Lamp display will automatically switch to mode function
display after approximately 5 seconds after selection.
(Microcurrent level will not be displayed.)
• Not applicable for COOLING mode.
WARM switch
Press once to switch to the next temperature level.
LOW MED HIGH
• Indicator shows the selected temperature level.
• Lamp display will automatically switch to mode function
display after approximately 5 seconds after selection.
(Temperature level will not be displayed.)
• Not applicable for COOLING mode.
Memory function
The appliance records last used microcurrent and
temperature level, and starts with the same setting
when switched on.
This memory function will reset when the appliance has
not been used for a long period of time or when the
battery has ran out.
: Microcurrent
(white)
: Warm
sensation
(orange)
OFF
2018/11/27 16:55:23