Before Using For The First Time; Setting The Time; Cleaning The Appliance Before Using It For The First Time; Cleaning The Accessories - Bosch HIS8655U Use And Care Manual

Removing the telescopic rail from the oven
Pull the lower part of the rail away from the rack guide.
1.
Lift the upper part of the rail off the rack guide.
2.
6 Before using for the first time

Before using for the first time

Carry out these steps before using your appliance.
Before using for the first time
¡ The appliance must be properly installed by a qualified
service provider before use.
¡ Read and understand all safety precautions → Page 3
and information in the Use and Care Manual prior to op-
erating.
¡ This Use and Care Manual covers several models. Not
all features are available on all models.
6.1 Setting the time
Once the appliance is connected to a power supply, ⁠ ⁠ :
flashes on the display. Set the time.
Use the and buttons to set the time.
1.
Press the button.
2.
a The time has now been set.
Note: Once the period allowed for setting the time on the
clock has elapsed, the time will automatically be saved.
Before using for the first time en-us
6.2 Cleaning the appliance before using it for
the first time
In order to prevent excess smoke and odor from manufac-
turing oils, heat up the oven for the first time when it is
empty and closed.
Note: There may be a slight odor during first uses. This is
normal and will disappear. Keep the room ventilated while
the appliance is heating.
Remove all packing materials and literature from the
1.
cooktop surface and the oven cavity.
Remove the accessories and the rack guides from the
2.
oven cavity.
Completely remove any leftover packaging, e.g. small
3.
pieces of polystyrene, from the oven cavity.
Some parts are covered with a protective film. Remove
4.
this scratch protection film.
Wipe the smooth surfaces in the oven cavity with a soft,
5.
damp cloth.
Turn the function selector to bake.
6.
Use to set the maximum temperature.
7.
Note: When the appliance is heating up for the first
time, you may hear crackling noises coming from the
oven.
Switch the oven off after one hour.
8.
Once oven has cooled wipe out the oven cavity with hot
9.
soapy water and replace the rack guides. If necessary,
clean the door panels.
Wipe off the cooktop surface with a clean, damp sponge
10.
and dry.
6.3 Cleaning the accessories
Before using the accessories, clean them thoroughly
▶
using a cloth and warm soapy water.

Cooktop operation

7 Cooktop operation
Here you will find out everything you need to know about
Cooktop operation
operating your cooktop.
7.1 Setting the power level
Adjust the power level of the cooking zone with the control
knobs.
Push and turn the control knob clockwise to the desired
▶
power level.
a The cooktop on indicator lights up.
a The selected power level lights up in the cooking zone
display.
Notes
¡ If there is no cookware on the cooking zone,
in the cooking zone display. This means that the cook-
ing zone tries to detect the cookware. Place cookware
on the cooking zone within 30 seconds, or the cooking
zone will switch itself off. Turn the control knob to 0 and
set the power level again.
¡ If the indicator lights up while cookware is present on
the cooking zone, check whether the cookware is suit-
able for induction cooking.
→ "Induction cooking", Page 20
lights up
17