Casio Privia PX-5S User Manual page 5

Range of the parameters of the Master Equalizer are improved. Range of the parameters of the Master Equalizer are improved.
Range of the parameters of the Master Equalizer are improved. Range of the parameters of the Master Equalizer are improved.
■
The frequency ranges of the Master Equalizer are improved as follows.
Parameter Value Ranges: Parameter Value Ranges:
Parameter Value Ranges: Parameter Value Ranges:
2 : Low Frequency
(50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800 [Hz])
Selects the low-range cutoff frequency.
4 : Mid1 Frequency
(100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1.0k, 1.3k, 1.6k, 2.0k, 2.5k, 3.2k, 4.0k, 5.0k, 6.3k, 8.0k [Hz])
Selects the low mid-range frequency.
6 : Mid2 Frequency
(100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1.0k, 1.3k, 1.6k, 2.0k, 2.5k, 3.2k, 4.0k, 5.0k, 6.3k, 8.0k [Hz])
Selects the high mid-range frequency.
8 : High Frequency
(2.0k, 2.5k, 3.2k, 4.0k, 5.0k, 6.0k, 8.0k, 10k, 13k, 16k [Hz])
Selects the high-range cutoff frequency.
Range of the parameters of the DSP Equalizer are improved. Range of the parameters of the DSP Equalizer are improved. Range of the parameters of the DSP Equalizer are improved. Range of the parameters of the DSP Equalizer are improved.
■ ■ ■ ■
The frequency ranges of the Master Equalizer are improved as follows.
Parameter Value Ranges: Parameter Value Ranges: Parameter Value Ranges: Parameter Value Ranges:
1 : EQ1 Frequency
(100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1.0k, 1.3k, 1.6k, 2.0k, 2.5k, 3.2k, 4.0k, 5.0k, 6.3k, 8.0k [Hz])
Adjusts the center frequency of Equalizer 1.
2 : EQ2 Frequency
(100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1.0k, 1.3k, 1.6k, 2.0k, 2.5k, 3.2k, 4.0k, 5.0k, 6.3k, 8.0k [Hz])
Adjusts the center frequency of Equalizer 2.
3 : EQ3 Frequency
(100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1.0k, 1.3k, 1.6k, 2.0k, 2.5k, 3.2k, 4.0k, 5.0k, 6.3k, 8.0k [Hz])
Adjusts the center frequency of Equalizer 3.
Fine tune control is added to the DSP Ptich Shifter. Fine tune control is added to the DSP Ptich Shifter.
Fine tune control is added to the DSP Ptich Shifter. Fine tune control is added to the DSP Ptich Shifter.
■ ■ ■ ■
Fine tune parameter is added to the DSP Pitch Shifter as follow.
Parameter Value Ranges: Parameter Value Ranges:
Parameter Value Ranges: Parameter Value Ranges:
7 : Fine(-50 - 0 - +50)
Adjust the fine tuning of the pitch.
-50 means quarter tone lower.
+50 means quarter tone higher.
Bypass functions are added to the System Effects and Master Effects. Bypass functions are added to the System Effects and Master Effects.
Bypass functions are added to the System Effects and Master Effects. Bypass functions are added to the System Effects and Master Effects.
■ ■ ■ ■
How to bypass the System Effects temporarily.
This function disables the all the system effects (System Chorus, System Delay and System Reverb) by bypassing them.
1. Hold down the [SYSTEM] button until the LED starts flashing to bypass the system effects.
2. Hold down the [SYSTEM] button until the LED goes off to enable the system effects again.
How to bypass the Master Effects temporarily.
This function disables the both of the master effects (Master Equalizer, Master Compressor) by bypassing them.
1. Hold down the [MASTER] button until the LED starts flashing to bypass the master effects.
2. Hold down the [MASTER] button until the LED goes off to enable the master effects again.
5