HermanMiller Canvas Office Landscape Installation And Disassembly For Recycling Instructions page 2

Fully Adjustable Universal Leg:
1. To adjust leg height; pull Inner Leg out from Outer Leg.
2. Remove Stopper from Inner Leg.
3. Reposition Stopper at desired height location.
4. Insert Inner Leg into Outer Leg, making sure Plastic Sleeve stays located at
end of Outer Leg.
Z
© 2013 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z and Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Outer Leg
Inner Leg
Stopper
Plastic Sleeve
Stopper
Outer Leg
Inner Leg
Part no. 1b6y4f rev C.
2