GE RAK160W2 Owner's Manual & Installation Instructions page 30

Initiating a Master Reset
If there are reported errors or configuration issues, the
user may master reset the thermostat to its default
parameters.
Procedure:
• Remove the faceplate of the thermostat
• Power down the thermostat by either removing the
batteries or cutting power to the thermostat.
• While the thermostat is powered off, press and hold the
"config" button located on the control board inside the
thermostat.
• Restore power to the thermostat by reinstalling the
batteries.
• Once the screen lights up, release the "config" button.
• If the master reset was successful, the thermostat will
display "12:00",indicating all settings will be reset to
default and the thermostat needs to be re-configured.
Please see "configuring thermostat" in the manual on
page 11.
Contact GE Appliances technical support at
1-844-GE4-PTAC
are not resolved.
49-5000637 Rev. 0
Troubleshooting
(or 844-434-7822) if the issues
option 1
30