Related Manuals for Kingfisher NMGT250
Summary of Contents for Kingfisher NMGT250
- Page 1 Grass Trimmer 250W 23cm NMGT250 BX220IM CAUTION: Read the instructions before using the product. No name_MNL_250W Grass Trimmer_GB_V4_210918_UK.indd 1 9/22/21 4:23 PM...
-
Page 2: Table Of Contents
Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. started... Getting Safety information Your product Before you start detail... more Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical specifications... -
Page 3: Safety Information
NMGT250 Safety information Safety warnings General safety warnings 1. Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator. - Page 4 Safety information NMGT250 Safety warnings 3. Keep children bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
- Page 5 NMGT250 Safety information Personal safety 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 6 Safety information NMGT250 Safety warnings 8. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. Power tool use and care 1.
- Page 7 NMGT250 Safety information 7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- Page 8 Safety information NMGT250 Safety warnings 2. Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord is damaged or worn.
- Page 9 NMGT250 Safety information 9. Always ensure that the ventilation openings are kept clear of debris. Maintenance and storage 1. Disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the disabling device or removable battery) before carrying out maintenance or cleaning work.
- Page 10 Safety information NMGT250 Safety warnings 7. Prolonged use of the product exposes the user to vibrations that can cause a range of conditions collectively known as hand-arm vibration syndrome (HAVS) e.g. fingers going white; as well as specific diseases such as carpal tunnel syndrome. To reduce this risk when using the product, always wear protective gloves and keep your hands warm.
- Page 11 NMGT250 Safety information 3. Danger of injury and property damage caused by flying objects. WARNING! This product produces electromagnetic field during operation! This field may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend...
- Page 12 Safety information NMGT250 Symbols Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. Do not expose the product to rain or wet conditions (moisture). Objects thrown by the product could hit the user or other bystanders.
-
Page 13: Your Product
NMGT250 Your product. Your product 1. Main handle b. Sliding slot (x2)* c. Bumper 2. On/off switch 8. Lower pole d. Trimming spool 3. Rear safeguard a. Spigot* e. Trimming line (x2) a. Hanging hole b. Screw hole (x2)* f. Spring 4. -
Page 14: Before You Start
Before you start NMGT250 Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 15 NMGT250 Before you start Before you start Pole assembly 1. Align and slide the sliding slot of the middle pole (7) onto the spigot (8a) of the lower pole (8). Fully insert the middle pole (7) and make sure that the screw holes (7a, 8b) are well aligned (Fig.
- Page 16 Before you start NMGT250 Setup WARNING! Never use the trimmer head (10) without the guard (9) properly fitted. NOTE: Always remove knife protection (9b) before use. Connection to power supply NOTE: The product is equipped with a power cord with the length of 7 m.
- Page 17 NMGT250 Before you start WARNING! Check the voltage! The voltage must comply with the information on the rating label! If using an extension cord it must be suitable for outdoor use with sockets protected against water splashing. Ensure the extension cord is of the proper size and type for your product: ·...
-
Page 18: Product Functions
Product functions NMGT250 Intended use This electric grass trimmer NMGT250 is designated with a rated power input of 250 Watts. The product is intended for cutting weed, grass or similar soft vegetation in areas that are hard to reach, e. g. under bushes, on slopes and edges. It may not be used to work on unusual thick, dry or wet grass, e. -
Page 19: Operation
NMGT250 Product functions General operation 1. Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. 2. Double check that the accessories and attachments are properly fixed. - Page 20 Operation NMGT250 Trimming 6. Ensure the cutting device remains clean and free from off-cuts that may cause it to jam. Check regularly. Release the on/off switch (2) and disconnect the product from the power supply before checking. 7. Trim longer grass in stages; do not cut long grass in one cut (Fig. 10). For the best results, cut longer grass in steps (Fig.
- Page 21 NMGT250 Operation Trimming Line feeding During use, the tip of the trimming lines (10e) will get shorter due to wear and the trimming line may break. Regularly check the condition of the trimming lines (10e) and adjust if necessary. The trimmer head (10) is equipped with a bumper (10c) helping to cut the trimming lines (10e) while operating.
- Page 22 Operation NMGT250 The golden rules for care WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! 1. Keep the product clean. Remove debris from it after each use and before storage.
- Page 23 NMGT250 Care and maintenance Trimming line Replace the trimming spool Replace the line spool when it is empty or worn. 1. Turn the product upside down to access the trimming head (10). 2. Hold the trimmer head (10) steady with one hand, then loosen the housing (10a) anticlockwise by the other hand and remove it (Fig.
- Page 24 Care and maintenance NMGT250 Trimming line Refill the trimming line in the trimming spool 1. Remove the trimming spool (10d) from the trimmer head (10) as instructed in chapter “Trimming line - Replace the trimming spool”. 2. Discard all the remaining lines (10e) from the trimming spool (10d).
-
Page 25: Care And Maintenance
NMGT250 Care and maintenance UK plug (only for UK market) If you need to replace the fitted plug, then follow the instructions below. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue – Neutral Brown –... -
Page 26: Troubleshooting
Care and maintenance NMGT250 Storage 1. Switch the product off and disconnect it from the power supply. 2. Clean the product as described above. 3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place. 4. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 °C and 30 °C. -
Page 27: Recycling And Disposal
NMGT250 Care and maintenance / Troubleshooting Troubleshooting Problem Possible cause Solution 2. Product does 2.1. Extension cord not suitable 2.1 Use a proper extension not reach full for operation with this cord power product 2.2. Power source 2.2 Connect to another (e.g. -
Page 28: Guarantee
Guarantee related queries should be addressed to the store you purchased this product from. The guarantee is in addition to and does not affect your statutory rights. Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, W26PX London United Kingdom www.kingfisher.com/products No name_MNL_250W Grass Trimmer_GB_V4_210918_UK.indd 28... - Page 29 NMGT250 Guarantee Distributor: B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom www.diy.com Screwfix Direct Limited Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com No name_MNL_250W Grass Trimmer_GB_V4_210918_UK.indd 29 9/22/21 4:23 PM...
-
Page 30: Technical Specifications
Guarantee NMGT250 Technical specifications General > Rated voltage, frequency : 230-240 V~,50 Hz > Rated power input : 250 W > Rated no load speed n : 11000 min : II / > Protection class > Weight : approx. 1.68 kg : approx. - Page 31 Proper measures include among others regular maintenance and care of the product and accessories, keeping hands warm, periodical breaks and proper planning of work processes. Rating label explanation Grass trimmer: NMGT250 NM = Brand name GT = Grass Trimmer 250 = Rated power (W) No name_MNL_250W Grass Trimmer_GB_V4_210918_UK.indd 31...
-
Page 32: Ec Declaration Of Conformity
NMGT250 Type / batch or serial number range 000001 to 999999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer. - Page 33 Nazwa i adres producenta lub jego upoważnionego przedstawiciela: Denumirea și adresa producătorului sau a reprezentantului său autorizat: Nombre y dirección del fabricante o de su representante autorizado: Nome e endereço do fabricante ou do respetivo mandatário: Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands This declaration of conformity is issued under the sole responsibility of the manufacturer.
- Page 34 Authorised signatory and technical file holder/signataire et responsable de la documentation technique authorisé/ podmiot uprawniony do wystawienia i adres prezechowywania dokumentacji technicznej/semnatar autorizat și deținător al dosarului tehnic/firmante autorizado y titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam,...
- Page 35 Pour consulter les manuels d’instructions en ligne, www.bricodepot.fr rendez-vous sur le site www.kingfisher.com/products www.castorama.pl Aby zapozna si z instrukcj obs ugi online, odwied stron www.kingfisher.com/products www.bricodepot.es Para consultar los manuales de instrucciones en línea, visite www.kingfisher.com/products www.bricodepot.pt...
Need help?
Do you have a question about the NMGT250 and is the answer not in the manual?
Questions and answers
When replacing the spool what type do I buy?
The spool that should be purchased for the Kingfisher NMGT250 is the trimmer spool with model number 5059340330068.
This answer is automatically generated