Related Manuals for Kingfisher NMHT18-Li
Summary of Contents for Kingfisher NMHT18-Li
- Page 1 Hedge Trimmer 18V 45cm NMHT18-Li BX220IM CAUTION: Read the instructions before using the product. MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 1 9/13/21 1:09 PM...
-
Page 2: Table Of Contents
Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Before you start detail... more Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical... -
Page 3: Safety Information
Safety information NMHT18-Li Safety warnings General power tool safety warnings WARNING! Read safety warnings, provided with this power tool. Failure to follow all instructions listed below may result in electric Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to... - Page 4 Safety information NMHT18-Li Safety warnings 2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric 3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of 4.
- Page 5 Safety information NMHT18-Li 3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source, picking up or carrying the tool. Carrying 4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result 5.
- Page 6 Safety information NMHT18-Li Safety warnings 3. Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of 4.
- Page 7 Safety information NMHT18-Li Battery tool use and care manufacturer. A charger that is suitable for one type battery packs. Use of any other battery packs may 3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another.
- Page 8 Safety information Safety information NMHT18-Li Safety warnings Service repair person using only identical replacement parts. This will ensure that safety of the power tool is 2. Never service damaged battery packs. Service of battery packs should only be performed by the Hedge trimmer safety warnings: 1.
- Page 9 Safety information NMHT18-Li 5. Hold the hedge trimmer by insulated gripping surfaces only, because the blade may contact hidden wiring or its own cord. Blades contacting a "live" wire may make exposed metal parts of the hedge trimmer "live" and could give the operator an electric 6.
- Page 10 Safety information Safety information NMHT18-Li Safety warnings 7. Do not disassemble the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted. Ensure fresh air 8. When disposing of battery pack, keep the battery pack of different electrochemical systems separate from each other.
- Page 11 Safety information Safety information NMHT18-Li Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. 1. Always be alert when using this product, so that you can recognise and handle risks early.
- Page 12 Safety information NMHT18-Li Symbols others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (direct current voltage) Milliampere per hour /min or Per minute °C Degree Celsius Gram Kilogram...
- Page 13 Safety information NMHT18-Li Do not expose the product to rain or wet conditions (moisture). Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation. In general, children must not come near the area where the product is.
-
Page 14: Your Product
Your product NMHT18-Li Your product 1. Cutting device (blade) 9. Battery docking port 2. Front safeguard 10. Housing 3. Safety switch 11. Blade cover 4. Front handle 12. Battery pack 5. Air vents a. Battery capacity indicators 6. Rear handle b. -
Page 15: Before You Start
Before you start NMHT18-Li Unpacking 2. Remove all packing materials and shipping devices if applicable. 3. Make sure the delivery contents are complete and free of any damage. If contact your dealer. Using an incomplete or damaged product represents a hazard to people and property. - Page 16 Before you start NMHT18-Li Setup Front safeguard The front safeguard (2) is already pre-installed on the housing (10) (Fig. 1). Fig. 1 Blade cover 1. Remove the blade cover (11) from the cutting device (blade) (1) before operation (Fig. 2).
- Page 17 Before you start NMHT18-Li Fig. 3 Fig. 4 Charging the battery pack The battery pack (12) for this product has been shipped in a low charge condition. Refer to the charger’s instruction manual (NMC18) for the details. Battery capacity indicators The battery pack (12) is equipped with the battery capacity indicators (12a) which are used to give an indication of the battery pack’s remaining capacity.
-
Page 18: In More Detail
Product functions NMHT18-Li Intended use This cordless hedge trimmer NMHT18-Li is designated with a rated voltage of 18 V . It is designed only to be used with the battery pack which is listed in The product is intended for cutting and trimming of hedges, bushes and shrubs in domestic gardens. -
Page 19: Operation
Operation NMHT18-Li General operation 1. Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows 3. Always hold the product on its handles. Keep the handles dry to ensure safe support. - Page 20 Operation NMHT18-Li Trimming 6. First cutting both sides from the bottom upwards to the top. This will prevent any of the cuttings falling into the path of the area still to be cut (Fig. 7). 7. After cutting the sides proceed to the top. Try to keep the cutting device angled at approximately 15°...
-
Page 21: Care And Maintenance
Operation / Care and maintenance NMHT18-Li 10. Lubricate the internal surfaces of the blade if the cutting device (blade) (1) overheats during operation (Fig. 11). WARNING! This operation must only be performed when the blades Fig. 11 After use 1. Switch the product off, remove the battery back and let it cool down. - Page 22 Care and maintenance NMHT18-Li General Cleaning 1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for areas that are hard to reach. 2. In particular clean the air vents (5) after every use with a cloth and brush.
-
Page 23: Troubleshooting
Troubleshooting NMHT18-Li 5. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 °C and 30 °C. 6. We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust. -
Page 24: Recycling And Disposal
Troubleshooting / Recycling and disposal NMHT18-Li Troubleshooting Problem Possible cause Solution 4. Product 4.1 Battery pack is 4.1 Remove and charge suddenly discharged battery pack stops 4.2 Battery pack is too hot 4.2 Remove battery pack and let it cool down 4.3 Cutting device is blocked... -
Page 25: Guarantee
Guarantee NMHT18-Li Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use. - Page 26 Guarantee NMHT18-Li Guarantee Distributor: B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom www.diy.com Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 26 9/13/21 1:10 PM...
-
Page 27: Technical
NMHT18-Li General > Rated voltage : 18V > Rated no load speed n : 1200 min > Blade length : 45 cm > Max. cutting length : 41.8 cm > Tooth gap : max. 16 mm > Protection class : III >... - Page 28 Proper measures include among others regular maintenance and care of the product and accessories, keeping hands warm, periodical breaks and proper planning of work processes. Rating label explanation Hedge trimmer: NMHT18-Li NM = Brand name HT = Hedge trimmer 18 = Rated voltage (V)
-
Page 29: Declaration Of Conformity
Declaration of conformity NMHT18-Li Declaration of conformity MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 29 9/13/21 1:10 PM... - Page 30 Pour consulter les manuels d’instructions en ligne, www.bricodepot.fr rendez-vous sur le site www.kingfisher.com/products www.castorama.pl Aby zapozna si z instrukcj obs ugi online, odwied stron www.kingfisher.com/products www.bricodepot.es Para consultar los manuales de instrucciones en línea, visite www.kingfisher.com/products www.bricodepot.pt...