Leuze electronic MSI 420.TMC-03 Manual page 13

TMC66 MSI 420.TMC-03
19/20 Q2
n.c. I10
n.c. I11
n.c. I12
Figure 4.1: Connection example for MSI 420.TMC-03 with start/restart interlock and contactor monitor-
ing (operating mode 3)
Step 2: Selection of operating mode
To select the desired operating mode, install the corresponding wire bridges as specified in table 4.2. In
the delivery state, no wire bridges are installed, hence operating mode 1 is configured. The selected oper-
ating mode must be validated by a competent person. If, for example, operating mode 3 has been
Leuze electronic
Designation
Safety output 2
Selection of operating mode
Selection of operating mode
Selection of operating mode
MSI 420.TMC-03
Comment
Semiconductor output (PNP)
see table 4.2 "Selection of operat-
ing mode"
see table 4.2 "Selection of operat-
ing mode"
see table 4.2 "Selection of operat-
ing mode"
11