Youcan Robot BW Space Pro User Manual page 20

• Camera settings
Recording resolution: Set the video resolution when recording.
Live video resolution: Set the real-time transmission resolution.
Bit rate: The number of data bits transmitted per unit time during video data
transmission. The higher the bit rate, the higher quality of the image.
The high bit rate may cause the lag of the screen. When the screen of real-time
stream lags, it is recommended to lower the bit rate appropriately.
Anti-shake: When this function is on, it can reduce the impact of motion that shakes
the screen. It is generally off at default.
Exposure: The brightness adjusted by the light-sensitive components. The exposure
index needs to be moderate, or the image would be brighter if the index is too high
and darker if too low. You can set the automatic gain or manually adjust the gain
value.
Image enhancement: Strengthen the detail features of images, improve the image
quality, and enrich the image information to meet the needs of special analysis.
It is generally off at default. When there is a large amount of water mist, it is
recommended to turn on the digital defogging function.
Noise reduction level: The function of noise reduction to reduce the degree of
screen noise from low to high intensity. The noise reduction level should be set
moderately because the higher of the noise reduction level would make the pictures
more blurred and the lower would generate noise to affect the screen preview.
Flip the screen left and right: The image will have left and right mirror changes.
Flip the screen up and down: The image will be flipped up and down.
Daylight anti-flash: The function of anti-strobe. Turn on to avoid the impact of
strobe caused by unconventional frequency of lights and light sources.
Infrared filtering: Support the detection of infrared light to meet the monitoring
needs of night vision scenes.
Day and night mode conversion: Support automatic switching of day and night
scenes. Usually in the daytime mode, the picture presents color without fill light; in
the night mode, the picture presents black and white and is filled by infrared light.
Electronic slow shutter: Control the exposure duration to enable the camera to get
the proper exposure and capture the dynamic traces in darker scenes.
18