Youcan Robot BW Space Pro User Manual page 10

Connect the Type-c cable to the charging port of the WiFi Repeater, start charging,
and the red indicator light will turn on; the indicator light will turn ofiE, indicating
that the charging is fully charged.
Cautions: When connecting the device, align the jack and turn the nut until it
is tightened; when unplugging the connector, unscrew the nut until it can be pulled
off.
Please keep the connector dry. It is prohibited to touch the connector front end with
wet or sweaty hands .
• Cautions: plugging and unplugging of 4-pin connector
Apply sealing lubricant
evenly to the sealing
ring of communication/
charging interface and
thread before connecting.
When plugging and
unplugging the connector,
please hold the connector
and do not hold the
tether at the end of the
connector.
USB
USB
nut
jack
Prohibited to touch the
connector front end with
wet or sweaty hands;
water should be dried
if there is water on the
connector.
08
When plugging the
connector, align the
jack and turn the nut
until it is tightened.