Youcan Robot BW Space Pro User Manual page 12

• Connect to WiFi
Access the mobile phone WiFi connection interface,
s e l e c t Yo u c a n - * * * * - 5 G ( R e c o m m e n d e d ) o r
Youcan-****, enter the password: 12345678.
• Open Youcan Dive App
After the WiFi connection is successful,
open the Youcan Dive APP, connect the
device, select BW Space Pro, enter directly
or log in by account. After the connection is
successful, slide to the right to unlock, and
the boot is successful. At this point, you
can use the APP to control the underwater
movement and shooting of the drone.
After the successful boot, BW Space Pro will have the sound of beep which is
normal;
• If the APP connection fails, please confirm whether the access permission of the
Youcan Dive APP is enabled on the mobile phone:
- Android phone, open "Settings", find "Apps and Services" - "Apps " – "APP
info", and turn on the permissions of the Youcan Dive APP(This path is slightly
different on different models of mobile phones, please find the correct path
according to your mobile phone, and enable access rights for the Youcan Dive
APP);
- iOS phone, open "Settings", find Youcan Dive, click "Wireless Data", and enable
"Wi-Fi and Cellular Networks" or "Local Network".
• In case of start failure, check the following things:
- If the device is appropriately powered;
- If the jack of the tether is connected to BW Space Pro or WiFi Repeater jack
appropriately;
-Access the mobile phone WiFi connection interface and check to see if the device
is connected. If the connection fails, reconnect the WiFi Repeater.
Home
10
Settings Wi-Fi
Wi-Fi
Youcanrobot-5G
CHOOSE A NETWORK...
Youcan-*****-5G
Youcan-*****
Siwimate
Youcan-5F8901-
Slide to Unlock