Connecting Your Monitor; Turning On The Monitor And Computer - Sony SDM-P232 Quick Setup Manual

Connecting your monitor

Connect your monitor to a computer or other equipment.
• Turn off the monitor, computer, and any other
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
1
Remove the back cover.
2
Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
3
Connect the supplied power cord to the monitor's
AC IN connector.
4
Connect the power cord to a power outlet.
back cover
1
to the DVI-D input connector
(digital RGB) for INPUT1 or
INPUT2
2
DVI-D video signal
cable (digital RGB)
(supplied)
3
to AC IN
to power
outlet
4
Note
For details on securing the cords, refer to the Operating Instructions on the
CD-ROM.
to the HD15 input connector
(analog RGB) for INPUT1 or
INPUT2
HD15-HD15
video signal
cable (analog
RGB)
(supplied)
power cord
(supplied)
Turning on the monitor and
computer
Turn on your monitor first, then a computer.
1
Press the MAIN POWER switch on the right side of
the monitor in the direction of the [.
The 1 (power) indicator lights up in red.
2
Press the 1 (power) switch on the front right of the
monitor.
The 1 (power) indicator lights up in green.
3
Turn on the computer.
2
1
MAIN POWER
US
3
(US)