Sony SDM-P232W Service Manual

SERVICE MANUAL
LCD panel
Input signal format
Resolution
Input signal levels
Power requirements
Power consumption
Operating temperature
SPECIFICATIONS
Panel type: a-Si TFT Active Matrix
Picture size: 23.0 inch
RGB operating frequency*
Horizontal:
28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:
48–85 Hz (analog RGB)
60 Hz (digital RGB)
Horizontal: Max.1920 dots
Vertical: Max.1200 lines
Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75 Ω, negative
(Sync on green)
Digital RGB (DVI) signal:
TMDS (Single link)
100–240 V, 50–60 Hz,
Max. 1.0 A
Max. 80 W
5–35 °C
TFT LCD Color Computer Display
SDM-P232W
Canadian Model
Dimensions (width/height/depth)
Display (upright):
Mass Approx. 12.7 kg (27 lb 16 oz)
(with stand)
Approx. 10.2 kg (22 lb 8 oz)
(without stand)
Plug & Play DDC2B
* Recommended horizontal and vertical timing condition
•
Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
US Model
AEP Model
× 446 × 251 mm
Approx. 566
3 × 5 ×
(22 / 17 / 10 inches)
8 8
(with stand)
× ×
Approx. 566 380 114 mm
3 × × 1
(22 / 15 4 / inches)
8 2
(without stand)