Sony SDM-P82 Setup Instructions

PLEASE READ ME FIRST FOR SETUP INSTRUCTIONS

For Optimal Performance the video settings should be configured to 1280
®
Windows 95, 98, NT, Me, 2000, XP.
Windows is a registered trademark of the Microsoft
Step 1:
Fig. 1
Sony Corporation © 2002
Printed in Thailand
®
Connect your display to your computer and then turn on the
computer. Turn on your Display power switch located on the bottom
left side of the panel (Fig. 1), then press the power button on the front
panel until the green light is on (Fig. 2). If no image appears, press
the "INPUT" selector button slowly and toggle through the 3 inputs
positions:
until the desired input is selected.
This monitor complies with the "DDC" Plug & Play standard and
should be recognized by the computer.
MAIN POWER
Lights in red
Note
If the computer does not recognize the monitor, install the information file for this monitor
using the supplied Windows Monitor Information/Windows Utility/Macintosh Utility Disk.
For details on installing, refer to the ReadMe E (English version) file on the disk.
Corporation.
INPUT1: DVI-D
m M
INPUT1: HD15
m M
INPUT2: HD15
Fig. 2
X/P series
1024 resolution at 60 Hz for
Lights in green
4-088-537-31(1)
(Continued)