Connecting Your Monitor - Sony SDM-HS95 Quick Setup Manual

To view the Operating
Instructions on the CD-
ROM
Note
To view the Operating Instructions on the
CD-ROM, Macromedia Shockwave
Player and Adobe Acrobat Reader
(version 6.0 or later) must be installed on
your computer. The "installs" folder on
the CD-ROM contains the installation
programs for them.
If you want to install those programs,
open the "My Computer" and right-click
on the CD-ROM drive, then select
"Explore" and open the "installs"
folder.(for Windows only)
If you are using a Macintosh
computer:
Double-click on the CD-ROM icon to open the
window, then double-click on the
.
"MONITOR" icon
To view the Operating
Instructions
The Operating Instructions files are included in
the supplied CD-ROM. Load the supplied CD-
ROM into the CD-ROM drive of your computer.
After a while, the introductory page of the CD-
ROM will open automatically.
If the introductory page does not appear
automatically, open the Operating Instruction file
directly. (for Windows only)
1 Open the "My Computer."
2 Right-click the "CD-ROM" drive, and select
"Explore."
3 Open the "manuals" folder.
4 Open the "HS" folder.
5Select and open the "HS_75_95_P_**.pdf."
("**" in the file name stands for the language in
which each PDF file is written. For example,
HS_75_95_P_GB.pdf is written in British
English.)
To exit from the CD-ROM
Click "EXIT/CD-ROM."
Setup
Unpacking
Make sure your carton contains everything
listed below.
• LCD display
• Power cord
• HD15-HD15 video signal cable (analog
RGB)
• DVI-D video signal cable (digital RGB)
• Cord strap
• CD-ROM (utility software for Windows/
Macintosh, Operating Instructions, etc.)
• Warranty card
• This Quick Setup Guide
Connecting your
monitor
Connect your monitor to a computer or other
equipment.
• Turn off the monitor, computer, and
any other equipment before
connecting them.
• Do not touch the pins of the video
signal cable plug.
1
Open the stand.
2
Remove the back cover.
3
Connect your monitor to a
computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a
video output connector on the computer. If
necessary, use an adapter (not supplied).
Connect the adapter to the computer before
connecting the video signal cable.
US
3
(US)