Operating Instructions - Skil PWRCORE 12 DL629A-00 Owner's Manual

OPERATING INSTRUCTIONS

WARNING
fluid or allow a fluid to flow inside them.
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
parts, making adjustments, cleaning, or performing maintenance .
This cordless drill driver must be used only with the battery packs and chargers listed below:
Battery Pack
2Ah
SKIL BY500101
SKIL BY519901
NOTICE: Please refer to the battery and charger manual for detailed operating information.
To Attach/Detach Battery Pack
(Fig .2)
Lock the trigger switch "OFF" on the tool by
placing the direction-of-rotation (forward/
center-lock/reverse) selector in the center
position before attaching or detaching the
battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack onto
the tool, be sure that the raised rib on the
battery pack aligns with the groove inside
the tool and that the latches snap into place
properly. Improper attachment of the battery pack can cause damage to internal components.
To detach the battery pack:
Depress the battery-release button located on the front of the battery pack to release the
battery pack. Pull the battery pack out and remove it from the tool.
WARNING
always be locked in the center position when not in use or carrying at your side .
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced .
Do not attempt to modify this tool or create accessories not recom-
mended for use with this tool .
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling
4Ah
SKIL BY519801
Battery tools are always in operating condition . Therefore, the
direction-of-rotation (forward/center-lock/reverse) selector should
Corrosive or conductive fluids, such as seawater,
Use of this product with damaged or missing parts
Any such alteration or modification is
Charger
SKIL QC535701
SKIL SC536501
Fig . 2
Battery-Release
Button
Attach
Detach
11