Page 1
IMPACT DRILL 1021 (F01101..) ME77 ORIGINAL INSTRUCTIONS ОРИГІНАЛЬНА ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ NOTICE ORIGINALE ΠΡΩΤΤΥΠ ΔΗΓΙΩΝ ΡΗΣΗΣ ORIGINALBETRIEBSANLEITUNG INSTRUCŢIUNI DE FOLOSIRE ORIGINELE GEBRUIKSAANWIJZING ORIGINALE BRUKSANVISNING I ORIGINAL ОРИГИНАЛНО РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ ORIGINAL BRUGSANVISNING PÔVODNÝ NÁVOD NA POUŽITIE ORIGINAL BRUKSANVISNING ORIGINALNE UPUTE ZA RAD ALKUPERÄISET OHJEET ORIGINALNO UPUTSTVO ZA RAD MANUAL ORIGINAL IZVIRNA NAVODILA MANUAL ORIGINAL ALGUPÄRANE KASUTUSJUHEND ISTRUZIONI ORIGINALI ORIĢINĀLĀ LIETOŠANAS PAMĀCĪBA EREDETI HASZNÁLATI UTASÍTÁS ORIGINALI INSTRUKCIJA PŮVODNÍM NÁVODEM K POUŽÍVÁNÍ...
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric Impact drill 1021 shock. f) If operating a power tool in a damp location is INTRODUCTION unavoidable, use an earth leakage circuit breaker. Use of an earth leakage circuit breaker reduces the risk • This tool is intended for impact drilling in brick as well...
If damaged, have the power tool repaired • Never use the tool when cord is damaged; have it before use. Many accidents are caused by poorly replaced by a qualified person maintained power tools. ACCESSORIES f) Keep cutting tools sharp and clean. • SKIL can assure flawless functioning of the tool only Properly maintained cutting tools with sharp cutting when original accessories are used edges are less likely to bind and are easier to control. • Use only accessories with an allowable speed matching g) Use the power tool, accessories and tool bits etc., at least the highest no-load speed of the tool...
! while working, always hold the tool at the grey- Vice President coloured grip area(s) Operations & Engineering Approval Manager - keep the ventilation slots uncovered - do not apply too much pressure on the tool; let the tool do the work for you SKIL Europe BV, 4825 BD Breda, NL APPLICATION ADVICE .0.010 • Use the appropriate bits # NOISE/VIBRATION ! only use sharp bits • Measured in accordance with EN 60 the sound • For drilling in concrete or stone a steady pressure on...
Need help?
Do you have a question about the 1021 and is the answer not in the manual?
Questions and answers