To Operate The Speed Control; Speed Control Guide For 7-Speed Hand Mixer - KitchenAid KEE07A Instructions Manual

to operate the speed control

note: Flashing light indicates ready to
operate. Do not touch beaters. If the Hand
Mixer runs when "0" is flashing, or there is
nothing displayed on the speed indicator,
do not use it. Arrange for service.

speed control Guide for 7-speed Hand Mixer

The 7-Speed Hand Mixer
should always be set on the
lowest speed to start mixing.
Move to higher speeds as
needed.
flashing 0 Indicates Hand
Mixer is plugged in and
ready to operate.
speed 1 For slow stirring,
combining, and starting
all mixing procedures. Use this speed to
stir in nuts, chocolate chips, shredded
cheese, onions, olives, and other chunky
ingredients. Mix flour and other dry
ingredients with liquids or other moist
mixtures. Helps prevent ingredients from
splashing out of bowl.
speed 2 Mix pancake batter.
W10406845B_EN_v01.indd 8
1. Plug the Hand Mixer into an electrical
outlet and place the Master Power
Switch in the "ON" position.
2. Press , and the Speed Indicator will
flash "0". This indicates the Hand Mixer
is ready to operate.
3. To increase the speed, press
To decrease the speed, press
4. When the mixing job is finished,
stop the Hand Mixer by touching
. Place Master Power Switch
in the "OFF" position before removing
accessories.
speed 3 Combine heavy mixtures, such
as cookie dough. Mix light cream cheese
spreads. Stir batters and gelatin mixtures.
speed 4 Combine heavy cream cheese
mixtures. Mash potatoes or squash.
speed 5 Mix muffins, quick breads,
batter breads, cake batters, and frostings.
Blend butter and sugar.
speed 6 Whip heavy cream and mousse
mixtures.
speed 7 Beat egg whites and meringue
mixtures.
note: The High Performance Beaters
Accessories are not designed for mixing
and kneading bread dough.
8
.
.
11/2/11 1:19 PM