Emerson ANDERSON GREENWOOD 5910C Manual

Pressure/vacuum relief valve with integrated flame arrester atex approved

Advertisement

Quick Links

ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED
FLAME ARRESTER (ATEX APPROVED)
Before installation, these instructions must be carefully read and understood.
FIGURE 1
MODEL 5910C

TABLE OF CONTENTS

1. Disclaimer of Warranties ............................. 1
3. Safety Precautions ....................................... 2
4. Practical Limitations .................................... 2
5. General .......................................................... 2
6. Construction ................................................. 2
7. Operation ....................................................... 3
8. Installation .................................................... 3
9. Maintenance ................................................. 4
10. Parts List ....................................................... 6
Emerson.com
WARNING
Failure to follow these instructions or to properly
install and maintain this equipment could result in
an explosion, fire and/or chemical contamination
causing property damage and personal injury or
death.
© 2022 Emerson. All rights reserved.

DISCLAIMER OF WARRANTIES

The contract between Anderson Greenwood
and our customer states Anderson
Greenwood's entire obligation. The contents of
this instruction manual shall not become part
of or modify any prior or existing agreement,
commitment or relationship between Anderson
Greenwood and our customer. There are no
express or implied warranties set out in this
instruction manual. The only warranties that
apply are those in the existing contract between
Anderson Greenwood and our customer.
The Anderson Greenwood 5910C Pressure
and vacuum relief valves with flame arrester
assembly have not been tested by Anderson
Greenwood under all possible operational
conditions, and Anderson Greenwood does not
have all the data relative to your application.
The information in this instruction manual
is not all-inclusive and does not and cannot
take into account all unique situations.
Consequently, you should review this product
literature in view of your application. If you have
any further questions, please contact Anderson
Greenwood for assistance.

LIMITATIONS OF SELLER'S LIABILITY

In the event that a court holds that this
instruction manual created some new
warranties, Seller's liability shall be limited
to repair or replacement under the standard
warranty clause. In no case shall Seller's
liability exceed that stated as limitations of
remedy in the contract between the Seller and
Buyer. Use of parts that are not manufactured
or supplied by Anderson Greenwood voids any
Anderson Greenwood warranty and relieves
Anderson Greenwood of any obligation to
service the product under warranty. Anderson
Greenwood recommends the use of only
Anderson Greenwood manufactured or
supplied parts to maintain or service Anderson
Greenwood 5910C Series Pressure and Vacuum
relief valve with Flame Arrester assembly.
VCIOM-16612-EN 22/02

Advertisement

Table of Contents
loading

Summary of Contents for Emerson ANDERSON GREENWOOD 5910C

  • Page 1: Table Of Contents

    ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) Before installation, these instructions must be carefully read and understood. FIGURE 1 DISCLAIMER OF WARRANTIES MODEL 5910C The contract between Anderson Greenwood and our customer states Anderson Greenwood’s entire obligation. The contents of...
  • Page 2: Safety Precautions

    ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) SAFETY PRECAUTIONS variables must be evaluated to ensure safety. protection measures, the overall safety of the The relative fire hazard of flammable mixtures combined installation shall be assessed, taking...
  • Page 3: Operation

    ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) OPERATION 2. Remove the weatherhood, flame element 4. To load pressure pallet weights, perform the assembly and/or cover(s) and all packing following: When the internal tank pressure approaches material above the pallets and within the a.
  • Page 4: Maintenance

    ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) MAINTENANCE (ASSEMBLING AND 5. Place the valve in a level position. Reach up 2. To replace pallet insert proceed as follows: DISMANTLING) through the inlet flange and carefully push a.
  • Page 5 ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) 4. To replace vacuum seat ring perform the CAUTION NOTE following: Whenever the flame element assembly and/or Under no circumstance should the element a. To replace vacuum side seat, it is only...
  • Page 6: Parts List

    ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) FIGURE 4 CONSTRUCTION AND ASSEMBLY DETAIL PARTS LIST Item No. Description Item No. Description Body Seat Ring Guide Post, Vacuum Screw Cap Hex Guide Post, Pressure Screw Cap Hex...
  • Page 7: Special Conditions For Safe Use

    ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) SPECIAL CONDITIONS FOR SAFE USE Marking on Pressure/Vacuum Relief Valve with integrated Flame Arrester (ATEX Approved) For IIA only the manufacturing is intended for sizes 2" (DN 50) to 8" (DN 200) for Types 5910C...
  • Page 8 ANDERSON GREENWOOD 5910C PRESSURE/VACUUM RELIEF VALVE WITH INTEGRATED FLAME ARRESTER (ATEX APPROVED) SPECIAL CONDITIONS FOR SAFE USE (CONTINUED) TABLE 5. TEMPERATURE SENSOR SAFETY SPECIFICATIONS All 5910C deflagration elements are rated TECHNICAL DATA THERMOCOUPLE for short time burning, tBT not to exceed one...
  • Page 9 D104601X012 © 2022 Emerson Electric Co. All rights reserved 02/22. Anderson Greenwood is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners.

Table of Contents