Download Print this page
Elite Screens Aeon CineWhite A8K Series User Manual

Elite Screens Aeon CineWhite A8K Series User Manual

Edge free acoustically transparent fixed frame screen

Advertisement

Quick Links

Aeon
EDGE FREE® Acoustically Transparent Fixed Frame Screen
Product Description:
The Aeon Series is a fixed frame projection screen that uses Elite's EDGE FREE® technology. The EDGE FREE®
design resembles a giant size flat panel TV display. The Aeon includes a bezel trim to further enhance the frame
appearance and absorb projector overshoot. An optional LED kit is available for backlighting.
The screen material included is our ISF Certified
is acoustically transparent for front projection. It is precisely formulated for high-resolution projectors to offer
accurate color fidelity but also designed to allow speaker placement behind the screen while its bonded black backing
reduces light loss to enhance contrast.
In order for the CineWhite® A8K to maintain its projection qualities and optimum performance please refer to the list
below for proper maintenance and cleaning.
Use a soft bristle brush to spot clean for dust.
Dip a soft bristle toothbrush in mild soap and water to clean light stains.
Never rub or apply pressure when cleaning the surface.
Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
To avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any other sharp or
abrasive objects.
Rev.08232021JA
CineWhite® A8K
USER'S GUIDE
M Type
CineWhite® A8K.
www.elitescreens.com
Series
which has an ultra-fine projection surface that
U-00235
1

Advertisement

loading

Summary of Contents for Elite Screens Aeon CineWhite A8K Series

  • Page 1 Aeon Series CineWhite® A8K EDGE FREE® Acoustically Transparent Fixed Frame Screen USER’S GUIDE M Type Product Description: The Aeon Series is a fixed frame projection screen that uses Elite’s EDGE FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display. The Aeon includes a bezel trim to further enhance the frame appearance and absorb projector overshoot.
  • Page 2 1. Frame and Edge Trim Parts List 2 pcs 2 pcs Main Frame Parts Edge Trim Parts item item vertical frame Part A. Part D. ½ horizontal frame Part B. Part E. ½ horizontal frame Part C. Part F. 2. Hardware Parts List M4*4 D5*4 M4*4...
  • Page 3: Frame Assembly

    Item Parts List 103” 123” 135” 150” Center Joints- M4 (bottom position) Center Joints-D5 (top position) Elbow Joints M4 (bottom position) Elbow Joints D5 (top position) Side cover Center Joints- M4 Side cover Elbow Joints M4 M4x7 Screws Spring Spring Hook wall brackets Φ5x50 Wall Screws Hollow Wall anchors...
  • Page 4: Back Side

    Step 5: Secure the elbow joints by fastening them with M4x7 screws ( , 4 at each corner. Screen Material Step 6: Put on the white gloves (p) and carefully unroll the screen material on a clean surface from the roller to the other side as shown below.
  • Page 5 Center Support Bar Step 9: Insert the Center Support Bar (o) into the upper top groove on the back of the frame with the bottom end near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in alignment with the groove.
  • Page 6 To avoid ripples forming in the material it is imperative that all of the corners are properly wrapped around the edges as illustrated in the check mark diagrams. Note (after all springs have been attached): Correct material installation –Corners of the screen material are properly wrapped around the corner edges of the frame and material is evenly tensioned and flat, creating a nicely taut surface.
  • Page 7 Connect edge trim frames (e/f) together using the M4 center joint (e) and secure with four of the M4x4 screws (m) as show in Step 1. Repeat for other side. Once both top and bottom edge trim frames have been connected, attach the vertical (left/right) sides edge trim frames (d) using the elbow joints (f) and secure with four M4x4 screws (m) on all corners, Step 2.
  • Page 8: Wall Installation

    Step 15: Position the fixed frame screen onto the top wall brackets as shown below and push down at the center of the top of the frame to secure. For Technical Support or an Elite Screens contact in your area, visit www.elitescreens.com Rev.08232021JA...

This manual is also suitable for:

Ar103hAr123hAr135hAr150hEdge free aeon cinewhite a8k series