COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
•
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
•
When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
•
When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
2
3
Fig.40
-
1
2
3
4
5
6
7
8
9
10
NOTE: *1 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *2 Clip-on cutting wheel guard attachment is not available in some countries such as Korea, Taiwan, and
mainland China. For more details, refer to the instruction of the clip-on cutting wheel guard attachment.
4
8
2
5
5
Application
-
-
Grinding / Sanding
-
Cutting-off
Wire brushing
Wire brushing
-
-
Cutting-off
1
2
6
100 mm (4") model
115 mm (4-1/2") model
Wheel Guard (for grinding wheel)
Depressed center wheel / Flap disc
Wheel Guard (for cut-off wheel) *1
Abrasive cut-off wheel / Diamond wheel
-
Clip-on cutting wheel guard attachment *2
Dust collecting wheel guard for cutting-off
25 ENGLISH
7
10
125 mm (5") model
Side grip
Wire wheel brush
Wire cup brush
Diamond wheel
9