Table of Contents
Advertisement
Using your DAB/FM Radio
Let's get started
STORING AND RECALLING STORED STATIONS
This function allows up to 10 stations to be programmed into the memory and stored in both DAB
and FM mode.
1.
To store a preset, first tune to your desired station, then press and hold the PRESET button for
longer than 2 seconds ,the display will show "Preset Store <#:(Empty)>" (F.7).
2. Press ▼/▲ buttons to select your desired station preset number.
3. Press the SELECT to confirm your selection, the station now broadcasting has now been
stored in the selected location (F.8).
4. To listen to the preset stations, press the PRESET button once and then press ▼/▲ buttons to
select the desired preset location. And press the SELECT button to confirm. (F.9) The station
name or frequency and preset location number will be displayed in the lower half of the
display. If the preset has not been allocated, "Preset Recall <#: (Empty)>" will be shown in the
display.
F.7F
Notes: If the unit is disconnected from the mains supply for any length of time and the batteries are
not installed, the programmed stations will be lost.
SETTING ALARMS (AC OPERATION ONLY)
1.
Alarms can be switched on or off in standby mode. However, the alarm parameters can only
be set when the product is on.
2. To set or change alarm 1, press ALARM/SNOOZE button once, then press the SELECT button.
(F.10)
3. To set or change alarm 2, press the ALARM/SNOOZE button twice, then press the SELECT
button.
4. To exist alarm setting mode, press the ALARM/SNOOZE button again.
20
F.8
F.10
.9
Advertisement
Table of Contents
