Troubleshooting - HOMCOM 800-124V70 Using Instructions

Note: Add 3 minutes to the preparation time when you start frying while the Hot-air fryer
is still cold.
The first time to use, there will be a slight smoke and odor, belongs to the normal
phenomenon
Cleaning
Clean the appliance after every use.
The pan and the non-stick coating shelf. Do not use metal kitchen utensils or
abrasive cleaning materials to clean them, as this may damage the non-stick
coating.
1. Remove the mains plug from the wall socket and let the appliance cool down.
Note: Remove the pan to let the Hot-air fryer cool down more quickly.
2. Wipe the outside of the appliance with a moist cloth.
3. Clean the pan and shelf with hot water, some washing-up liquid and a non-abrasive
sponge.
You can use degreasing liquid to remove any remaining dirt.
Tip: If dirt is stuck to the shelf or the bottom of the pan, fill the pan with hot water with
some washing-up liquid. Put the shelf in the pan and let the pan and the shelf soak for
approximately 10 minutes.
4. Clean the inside of the appliance with hot water and non-abrasive sponge.
5. Clean the heating element with a cleaning brush to remove any food residues.
Storage
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
Environment
Do not throw away the appliance with the normal household waste when it is
exhausted, but hand it in at an official collection point for recycling. By doing this, you
help to preserve the environment.

Troubleshooting

problem
The Hot-air fryer
does not work
The ingredients
fried with the air
fryer are not done.
Possible cause
The appliance is not
plugged in.
The appliance is not
plugged in.
The amount of
ingredients in the
basket is too big.
The set temperature
is too low.
The preparation time
is too short.
EN
Solution
Put the mains plug in an earthed wall
socket.
Set the timer key to the required
preparation time to switch on the
appliance.
Put smaller batches of ingredients in
the basket. Smaller batches are fried
more evenly.
Set the temperature key to the
required temperature setting (see
section 'settings' in chapter 'Using the
appliance').
Set the timer to the required preparation
time (see section 'Settings' in chapter'
Using the appliance').