Advertisement
Quick Links
—— Instruction Manual ——
ShootOut Combo Aluminum Football Soccer Goal Kit
Bison Model: SC2480IGAFB, or SC2480PA44FB
P A R T S L I S T
Item
Qty
Description
A
4
Crossbar
B
2
Inner Tube
C
2
Connecting Bar
D
6
Football Crossbar Support Bracket
E
8
3/8" x 1" Hex Bolt
F
12
5/16" x 1" Carriage Bolt
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
Read all instructions before proceeding.
It is imperative that all Combination Football/Soccer Goals be used only in accordance with safety
guidelines contained in these instructions as well as those found on the safety warning labels attached to the
1. Check for structural integrity and loose hardware before every use. Replace damaged or missing parts or
fasteners immediately.
2.
Ensure all safety/warning labels are clearly visible.
3.
Bison Combination Football/Soccer Goals with No-Tip feature properly installed require no additional
loose ballasts or hold down anchors.
4.
Always instruct players, managers, coaches, trainers, teachers, maintenance and all other personnel who
might come into contact with the goal, on the safe handling of the potential dangers associated with
movable goals.
5.
Always exercise extreme caution when moving portable goals, and allow adequate manpower to move
goals. Movable goals should be only moved by authorized and trained personnel.
6.
NEVER allow anyone to climb on the net or goal framework.
7.
Movable goals should only be used on LEVEL fields, NEVER on a slope or hill area.
8.
Most of the tip over injuries occur when portable goals are unattended. Anchor or chain one goal to
another or to nearby fenceposts, dugouts, or any other similar sturdy structure when not in use. If this is
not practical, store movable soccer goals in a place where children cannot have access to them.
Implementation Date: 06/01/2022
WARNING!
goals. Failure to do so can cause serious injury or death.
IMPORTANT SAFETY INSTRUCTIONS!
Rev: 2
N.J.C.
File:
Item
Qty
Description
G
12
5/16" Flat Washer
H
12
5/16" Nylon Lock Nut
I
64
3/8" x 1" Thread Cutting Hex Bolts
J
4
10' Upright
K
4
Upright Support
\publisher\instructions\SC2480AFB
1
Customer Service
(800) 247-7668
Ref#: 860166
Advertisement
Related Manuals for Bison SC2480IGAFB
Summary of Contents for Bison SC2480IGAFB
- Page 1 Ensure all safety/warning labels are clearly visible. Bison Combination Football/Soccer Goals with No-Tip feature properly installed require no additional loose ballasts or hold down anchors. Always instruct players, managers, coaches, trainers, teachers, maintenance and all other personnel who might come into contact with the goal, on the safe handling of the potential dangers associated with movable goals.
- Page 2 1. Assemble Soccer Goal per separate instructions provided. 2. Unpack and lay out two Crossbars (A), one Inner Tube (B), and one Connecting Bar (C) on a flat surface. Slide the Connecting Bar (C) into the Inner Tube (B) through the channel so that all the holes are lined up. Insert the Inner Tube (B) into one of the Crossbars (A) leaving half of the Inner Tube (B) exposed.
- Page 3 Figure 2 Figure 3 Figure 4...