Using Your Converter Box; Tuning Your Converter Box On Or Off; Setting The Output Channel; Changing Channels - Insignia NS-DXA1 User Manual

Insignia NS-DXA1 Coupon Eligible Converter Box
6 After the channel search is complete, press
. The Time Zone screen opens.
7 Press to select a time zone, then
or
press . The THANK YOU screen opens.
8 Press to complete the setup and close the
Install Guide.

Using your converter box

Tuning your converter box on or off

To turn your converter box on or off:
1 Make sure that the TV is connected to your
converter box and that the TV and your
converter box are plugged into power outlets.
2 Press POWER. The power LED lights.
• Red–Standby mode
• Blue–ON mode
• Blinking–Receiving remote control signal
3 If this is the first time you have turned on your
converter box, follow the on-screen prompts
to set basic options. For more information,
see "Setting basic options" on page 4.
4 To turn off your converter box, press POWER
again.

Setting the output channel

If the TV is connected through the To TV (RF)
jack, you need to set the output channel for the
TV signal. The TV must be tuned to the same
channel as output channel.
To set the output channel:
1 Press MENU. The SETUP menu opens.
2 Press
3 Press

Changing channels

To change channels:
•
•
•
•

Adjusting the volume

To adjust the volume:
•
•
Warning
If the volume is set too high when you press MUTE to
restore the sound, you may damage your hearing or the TV
speakers.
Note
For best performance, set the volume control on the TV to
mid-range, then use the converter box remote control to
adjust the volume.
www.insignia-products.com
or to select Output Channel, then
press or .
or to select channel 3 or 4, then
press .
Press CH or CH to select a channel in
the memorized channel list.
Press the number buttons for the channel
you want. If you want a digital sub channel,
press the number buttons for the main
channel, press –, then press the number for
the sub channel. For more information about
sub channels, see "Digital sub channels" on
page 2.
When you use the number buttons to select a
channel, the Channel List appears. Press
or to select the channel, then press
Press RECALL to return to the last channel
you were watching.
Press FAV to select a channel from the
Favorites list.
Press VOL + or VOL – to increase or
decrease the volume.
Press MUTE to turn off the sound. Press
MUTE again to restore the sound.
.
5