Siemens SIMATIC NET SCALANCE XC-100 Operating Instructions Manual page 42

Technical specifications
7.1 Technical specifications of the SCALANCE XC106-2 (SC)
Attachment to Industrial Ethernet
Electrical connectors
Properties
Quantity
Connector
Properties
Transmission speed
Optical connectors
Optical connectors
Quantity
Connectors
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*) Depending on the cable used:
• If you are using at least OM1 fibers (attenuation ≤ 1.5 dB/km, bandwidth length product ≥
500 MHz*km), you can reach a cable length of up to 3 km.
• When are using fibers with attenuation values ≤ 1 dB/km, you can reach a cable length of up
to 5 km.
You can find additional information in the "Industrial Ethernet / PROFINET Passive network
components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
42
6
RJ-45 jack
Half/full duplex, MDI‑X pinning
10 / 100 Mbps
2
The attachment to Industrial Ethernet uses SC connector tech‐
nology (Subscriber Connector).
100Base-FX complying with IEEE 802.3
100 Mbps (Fast Ethernet)
Multimode fiber-optic cable
LED/Class1-LASER "Eye safe"
1300 nm
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
At 50 μm
At 62.5 μm
Operating Instructions, 06/2022, C79000-G8976-C415-06
3 km
3 km
-24 dBm
-20 dBm
-14 dBm
-31 dBm
-12 dBm
SCALANCE XC-100