Table of Contents
Advertisement
Last update: 2019-07-04 09:50
This uses Universal plug-and-play broadcast technology.
3. LEDs and Push-button - explanation
3.1 LEDs
Boot-up
On the side of the Venus GX, there is an LED. During power-up it it goes through these states:
Stage 1: Both green and red illuminate briefly and faintly (it's hard to see the green) for
approximately 1 second.
Stage 2: Red illuminates for approximately 1 second.
Stage 3: Green illuminates for approximately 0.5 seconds.
Stage 4: Both green and red illuminate briefly and faintly (it's hard to see the green) for
approximately 1 second.
After that the LED will be blinking green continually.
3.2 Small button located to the right of the green 14-Terminal Connector
Block
https://www.victronenergy.com/live/
venus-gx:start https://www.victronenergy.com/live/venus-gx:start?rev=1562226653
Printed on 2022-02-13 12:18
Advertisement
Table of Contents
