What You Can Do; What You Should Know - ZyXEL Communications WAP3205 User Manual

Hide thumbs Also See for WAP3205:
Table of Contents

Advertisement

6.2 Wha t Yo u C a n Do
Wireless screens vary according to the device mode you are using.
Wireless Screen
General
MAC Filter
Advanced
WPS
WPS Station
Scheduling
AP Select
WLAN Information
See
Chapter 4 on page 33
• Use the
G e ne ra l
mode
(Section 6.4 on page
• Use the
MAC Filte r
connecting to the WAP3205 v3
• Use the
Adva nc e d
page
62).
• Use the
WPS
configure security settings manually
• Use the
WPS Sta tio n
• Use the
Sc he duling
65).
• Use the
AP Se le c t
repeater mode) to connect to. You should know the security settings of the target AP
page
66).
• Use the
WL AN Info rm a tio n
(Section 6.11 on page
6.3 Wha t Yo u Sho uld Kno w
Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
Chapter 6 Wireless LAN
Access Point
for more information on device modes.
screen to enable the Wireless LAN, enter the SSID and select the wireless security
57).
screen to allow or deny wireless stations based on their MAC addresses from
(Section 6.5 on page
screen to allow intra-BSS networking and set the RTS/CTS Threshold
screen to quickly set up a wireless network with strong security, without having to
screen to add a wireless station using WPS
screen to set the times your wireless LAN is turned on and off
screen to choose an access point that you want the WAP3205 v3 (in universal
screen to view the SSID and security of the selected AP wireless network
67).
WAP3205 v3 User's Guide
Universal Repeater
Client Bridge
61).
(Section 6.7 on page
63).
55
(Section 6.8 on page
64).
(Section 6.9 on page
(Section 6.10 on
(Section 6.6 on

Advertisement

Table of Contents
loading

Table of Contents