TP-Link TL-WPA4220 User Manual page 30

Chapter 3
To backup configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to
3. Click
bin file will be stored to your computer.
To restore configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to
3. Click
click RESTORE. The configuration file is config.bin.
4. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the extender.
To reset the extender to factory default settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to
3. Click
4. Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the extender.
Downloaded from ManualsNet.com
Settings > Backup & Restore
BACK UP to save a copy of the current settings to your local computer. A
Settings > Backup & Restore
BROWSE to locate the backup configuration file stored on your computer, and
Settings > Factory Default Restore
FACTORY RESTORE to reset the extender.
search engine
Configuring via Web Management Interface
page.
page.
page.
config.
28