Administration; Lan Ip Address; Set Up System Time - TP-Link TL-WPA4220 User Manual

Chapter 3
3 11
3 11 1
Follow the steps below to configure LAN settings of the extender.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Device Settings
LAN Type:
obtain IP Address from the main router. Select
configure the LAN parameters.
IP Address:
Subnet Mask:
Gateway:
Primary DNS:
Secondary DNS:
DNS servers.
3 11 2
System time is the time displayed while the extender is running. The system time you
configure here will be used for other time-based functions like Parental Controls and
Wi-Fi Schedules. You can manually set how to get the system time.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Settings
Downloaded from ManualsNet.com

Administration

LAN IP Address

> LAN Settings.
Select Obtain an IP address automatically
The IP address of the powerline extender.
The subnet mask associated with IP address.
The IP address of the gateway device.
Input the DNS IP address provided by your ISP.
Input the IP address of another DNS server if your ISP provides two

Set Up System Time

> Time Settings page.
search engine
Configuring via Web Management Interface
to have your extender automatically
Use the following IP address to manually
25