Advertisement
DEMO MANUAL DC2442A
SOFTWARE CONTROL WITH LTpowerPlay
2
The DC1613 USB-to-I
C adapter interfaces the PC run-
ning LTpowerPlay to the DC2442A board. Connect the
DC1613 adapter to the PC through a USB cable, and
connect the DC2442A board through the ribbon cable
to connector J2 (Figure 3).
8
Launch the LTpowerPlay GUI on the PC. The software
identifies the DC1613 controller, then the DC2442A board,
and begins communicating through the I
LTC4282. Once this communication has been established,
the GUI displays its main window (Figure 4).
Figure 4. LTpowerPlay GUI Window
2
C bus with the
dc2442af
Advertisement
Need help?
Do you have a question about the DC2442A and is the answer not in the manual?
Questions and answers