Table of Contents
Advertisement
Operating Your Camera
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
2. S elect a desired mode using the Function Setup.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlights, the light
can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE : C hange the color / transparency of the masking area.
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced
OFF : Not being used
3. S elect a desired mode using the Function Setup switch and press the Function Setup switch.
Select 'BLC' to adjust the area to be
enhanced then adjust the level.
LOW
COLOR DOME CAMERA
DC
ATW
OFF
OFF
ON
HLC : E nable the user to change the level,
limit, mask color/tone and area.
120
5
172
22
User Guide
Notes
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT
ONLY mode.
• The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
• BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
SSNR3
This function reduces the background noise in a low luminance environment.
1. W hen the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
2. Select a desired mode using the Function Setup switch.
O FF : Deactivates SSNR3. Noise is not reduced.
O N : Activates SSNR3 so that noise is reduced.
3. S et the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the
noise reduction level.
Notes
• You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is
'OFF'.
• When adjusting the noise reduction level in the SSNR mode, remember that the higher the
level set, the more the noise level will be reduced, as will the brightness of the image.
COLOR DOME CAMERA
DC
ATW
OFF
OFF
ON
AUTO
23
User Guide
Advertisement
Table of Contents
