Sony BRIGHTERA VPL-FH30 Brochure & Specs page 3

Installation Advantages
Lens Shift Function
The VPL-FH30 has a Lens Shift function which is controlled
from the projector control panel or the supplied Remote
Commander unit. Using this function, the position of the
®
projected image can be moved vertically by up to 60% and
horizontally from -32% through to +32%. Images can be easily
adjusted to the desired settings during installation.
Convenient, Simple Projector Replacement
The standard 1.6x zoom lens enables installation flexibility
when replacing an existing projector with the VPL-FH30 –
there's no need to change ceiling mount positions. For
applications where more than a standard lens is needed,
the VPL-FH30 is compatible with the optional VPLL-Z1024 and
VPLL-Z1032 accessory lenses designed for Sony's current
VPL-F40 Series.
Conventional 1
Shorter throw ratio
Broad throw ratio simplifies projector replacement
Centered Lens Design
The centered lens provides symmetry for a balanced
installation, and makes setup very simple.
Balanced and symmetrical installation
Conventional 2
VPL-FH30
Longer throw ratio
"Blend-in" Design
The VPL-FH30 showcases a newly designed low-profile chassis,
so the projector appears to blend into the ceiling or wall on
which it is mounted. The connector panel is located on the
front of the unit so its cables cannot be seen by the audience.
Good TCO and ECO-friendly Design
Long-lasting Lamp
By incorporating a newly developed high-performance lamp
and advanced lamp-control technology, the VPL-FH30 offers a
recommended lamp replacement time of approximately 4000
hours.*
1
VPL-FH30
VPL-FW41
Conventional
model
Recommended lamp replacement time*
*1 in standard mode. Expected maintenance time, not guaranteed. Lamp
performance will vary based on operating environment and use.
*2 The values are approximate
Low Power Consumption
The VPL-FH30 offers remarkably low power consumption,
allowing users to make significant savings on their electricity
expenses.
ECO MODE Key
With a single push of the ECO MODE key on either the
projector or the supplied Remote Commander
can select an energy-saving setting from the ECO Mode
ECO MODE key
4000 hours
2500 hours
2
unit, users
®
3