iRobot Roomba RVE-Y1 Owner's Manual page 12

Washing the bin
Important: Do not wash the
filter. Remove the filter before
EN
washing the bin.
1
Release the bin, remove the
filter and open the bin door.
2
Rinse the bin using
warm water.
Note: Bin is not dishwasher safe.
3
Make sure that the bin is
completely dry. Reinsert filter
and place bin back in the
robot.
8 For more information, visit global.irobot.com
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to remove it
from the robot.
2
Pull firmly on the wheel to remove it from its housing
(see illustration below).
3
Remove any debris from inside the wheel cavity.
4
Reinstall all parts when finished.
Make sure that the wheel clicks back into place.
Housing
Important: A front wheel clogged with hair and debris
could result in damage to your floor. If the wheel is not
spinning freely after you have cleaned it, please contact
Customer Care.
Axle Wheel