Cult 5059413395888 Assembly & Care Instructions

Cult 5059413395888 Assembly & Care Instructions

1 drawer desk 1300x500x775mm

Advertisement

Quick Links

ASSEMBLY & PRODUCT CARE
1 Drawer Desk 1300x500x775mm
5059413395888
Thank you for purchasing this PRODUCT. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
(included)
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer
from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 25 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5059413395888 and is the answer not in the manual?

Questions and answers

Summary of Contents for Cult 5059413395888

  • Page 1 ASSEMBLY & PRODUCT CARE 1 Drawer Desk 1300x500x775mm 5059413395888 Thank you for purchasing this PRODUCT. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product...
  • Page 2 Fittings and parts checklist Part Description Carcase Legs Fixing Description M8 Screw nut M8 Flat washer Wrench...
  • Page 3 Step by step assembly instructions IMPORTANT: To avoid damage to the parts, tighten fixings by hand only Step One Place the top (part 1) top side down on a clean carpet or blanket to avoid damage Step Two Position leg (part 2) into holes as below then tighten with washer (B) and nut (A) using wrench (C) provided in clockwise Note: Failure to tighten legs securely, will cause product to be unstable...
  • Page 4 Step Three Repeat step two until all legs (part 2) are assembled Step Four Carefully stand Office Desk to upright position. IMPORTANT: WHEN LIFTING OR MOVING THE OFFICE DESK ALWAYS DO SO FROM THE UNDER FRAME AND NOT THE OFFICE DESK TOP Step Five Secure the office desk to the wall using the anti-topple kit provided, following the instructions detailed below.
  • Page 5 IMPORTANT: The device must be fitted to this product in accordance with the following parts: 2 x plastic cable tie, 2 x plastic wall bracket. IMPORTANT: Fittings into the wall are not included. You will need to choose screws/fittings which are appropriate for securing the device to the type of walls you have. If you are unsure what wall fixing you require, please seek professional advice.
  • Page 6 Safety Instructions Never drag furniture when moving it, always lift it. When lifting or moving a table always do so from under frame and not the table top. Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury.
  • Page 7 Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central heating can cause damage such as warping. How to care for Painted Wood furniture Hand painted brush stroke finish's will hold up to everyday wear and tear quite nicely.
  • Page 8 Cleaning your metal furniture is very simple. Use a soft cotton cloth and clean with mild detergent or water, using a towel immediately dry the furniture afterwards. Metal furniture is usually damaged due to rust, as a precaution a soft wax after cleaning will help seal it.

Table of Contents